Replacing The Tpm - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

System board and components
Figure 127: Removing the TPM spacer
▶ Using a flat nose pliers, press together the hooks on the TPM spacer (1, see
close-up) and remove it from the system board (2).
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
▶ Install the system board, see
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Installing the bay cover" on page
▶
"Locking the server" on page
▶
"Resuming BitLocker functionality" on page
15.4.4

Replacing the TPM

Field Replaceable Unit
(FRU)
192
"Installing the new system board" on page
50.
56.
57.
58.
59.
Upgrade and Maintenance Manual
68.
Hardware: 40 minutes
211.
TX1310 M5