System board and components
Concluding steps
▶
"Installing the cross bar" on page
▶
"Installing the fan cage" on page
▶
"Installing the air duct" on page
▶ Install all riser modules, see
▶
"Reassembling" on page
▶ If applicable, install the OCP module, see
page
249.
▶ Install all PSUs, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
16.4.5
Replacing the TPM
Field Replaceable Unit
(FRU)
488
81.
76.
79.
"Installing a riser module" on page
60.
"Installing a hot-plug PSU" on page
65.
69.
Upgrade and Maintenance Manual
"Installing an OCP module" on
124.
69.
Hardware: 35 minutes
72.
RX2540 M6