Concluding steps
▶ Install all riser modules, see
▶ Install all fan modules, see
▶ Install the air duct, see
▶ Install the system board, see
▶
"Reassembling" on page
▶ Install all PSUs, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
15.4.5
Replacing the TPM
Field Replaceable Unit
(FRU)
Tools:
Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– flat nose pliers
– thin slotted screw driver (2 x 0.4 mm)
(*)
For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
RX1330 M5
"Installing a riser module" on page
"Installing the new fan module" on page
"Installing the air duct" on page
"Installing the new system board" on page
53.
"Installing a hot-plug PSU" on page
57.
60.
(*)
Upgrade and Maintenance Manual
System board and components
66.
102.
61.
Hardware: 35 minutes
(*)
64.
176.
333.
303