System board and components
16.4.5
Replacing the TPM
Field Replaceable Unit
(FRU)
Tools:
Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
– Torx 30 screw driver
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– flat nose pliers
– thin slotted screw driver (2 x 0.4 mm)
(*)
For Japan:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all PSUs, see
358
(*)
48.
"Removing a hot-plug PSU" on page
Upgrade and Maintenance Manual
Hardware: 35 minutes
(*)
45.
75.
49.
48.
113.
RX2530 M6