Removing The Tpm - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Concluding steps
▶ If applicable,
"Installing an expansion card" on page
▶ If applicable,
"Installing the riser module 2" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
▶ Enable the TPM in the system board BIOS, see
system board BIOS" on page
Enabling the TPM in the system board BIOS
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Configuration menu.
▶ Select the Security Configuration submenu.
▶ Set the TPM Support setting to Enabled.
▶ Under Pending TPM operation, select the desired TPM operation mode.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
16.4.4

Removing the TPM

Field Replaceable Unit
(FRU)
RX2540 M6
60.
65.
69.
483.
Upgrade and Maintenance Manual
System board and components
255.
73.
69.
105.
"Enabling the TPM in the
Hardware: 30 minutes
483