Removing The Tpm - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

14.4.3

Removing the TPM

Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver
Removing the TPM:
– Bit screw driver
– flat nose pliers
– TPM bit insert
(*)
For Japan:
– TPM module fixing tool (S26361-F3552-L909)
CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
Preliminary steps are not necessary, if a system board has to be
replaced and the TPM is used again.
▶ Before removing the TPM board, remove the BitLocker protection and
decrypt the volume, see
volume".
▶ Disable the TPM in the system board BIOS, see
system board BIOS".
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
TX1330 M4
(*)
"Removing BitLocker protection and decrypting the
47.
Upgrade and Maintenance Manual
System board and components
Hardware: 30 minutes
"Disabling the TPM in the
99.
48.
421