Removing The Tpm - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

17.4.4

Removing the TPM

Field Replaceable Unit
(FRU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screwdriver
– Torx 30 screwdriver
Removing the TPM:
– Bit screwdriver
– flat nose pliers
– TPM bit insert
(*)
For Japan:
– Dedicated TPM screwdriver（CWZ8291A）
CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
Preliminary steps are not necessary, if a system board has to be
replaced and the TPM is used again.
▶ Before removing the TPM board, remove the BitLocker protection and
decrypt the volume, see
volume" on page
▶ Disable the TPM in the system board BIOS, see
system board BIOS" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
RX2540 M7
(*)
"Removing BitLocker protection and decrypting the
498.
499.
Upgrade and Maintenance Manual
System board and components
Hardware: 30 minutes
"Disabling the TPM in the
89.
49.
497