Removing The Tpm - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

System board and components
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
Enabling the TPM in the system board BIOS
Proceed as follows:
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Advanced menu.
▶ Select the Trusted Computing submenu.
▶ Set the TPM Support and TPM State settings to Enabled.
▶ Under Pending TPM operation, select the desired TPM operation mode.
▶ Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
17.4.4

Removing the TPM

Field Replaceable Unit
(FRU)
306
54.
57.
60.
Upgrade and Maintenance Manual
91.
Hardware: 30 minutes
TX1320 M5