13.2.2 Removing the front LAN connector
Field Replaceable Units (FRU)
Average task duration: 10 minutes
13.2.2.1 Required tools
Preliminary and concluding steps: tool-less
●
Removing the front LAN connector:
●
– Phillips PH2 / (+) No. 2 screw driver
13.2.2.2 Preliminary steps
Before removing the front LAN connector, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Locate the defective server as described in section
server" on page
Ê Shut down the server as described in section
page
58.
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
TX120 S3
79.
50.
Upgrade and Maintenance Manual
Front panel and LAN connector
"Disabling BitLocker
"Locating the defective
"Shutting down the server" on
"Opening the server" on
307