Front panel
13.2.2 Removing a Front USB connector
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
13.2.2.1 Preliminary steps
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 51
Ê
13.2.2.2 Disconnecting the front USB connector
Figure 161: Disconnecting front USB connector cable
Ê Disconnect the cable end of the front USB connector (1).
Ê If applicable, disconnect the FBU adapter cable from the TFM, see section
"Removing the defective TFM" on page
268
Upgrade and Maintenance Manual
Hardware: 5 minutes
192.
TX1320 M4