13.2.2 Removing the front VGA connector
Field Replaceable Unit
(FRU)
Tools: Socket screw driver (5 mm)
Wrench key for UNC #4-40 hexagon bolts
13.2.2.1 Preliminary steps
"Disabling BitLocker functionality" on page 73
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 57
Ê
"Removing the fan box" on page 162
Ê
13.2.2.2 Removing the front VGA cable
Figure 239: Disconnecting the front VGA cable
Ê Remove the front panel cable from the system board (1).
RX300 S8
Upgrade and Maintenance Manual
Front panel and external connectors
Hardware: 10 minutes
373