Concluding Steps; Removing The Front Vga Connector - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Figure 212: Connecting front panel cables
Ê Connect the front VGA cable to the system board.
Ê Run the front VGA cable through the cable clamps as shown.

13.2.1.6 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 171
Ê
"Reassembling" on page 59
Ê
"Connecting the server to the power source" on page 64
Ê
"Switching on the server" on page 66
Ê
"Enabling BitLocker functionality" on page 93
Ê

13.2.2 Removing the front VGA connector

Field Replaceable Unit
(FRU)
RX2520 M1
Upgrade and Maintenance Manual
Front panel and external connectors
Hardware: 10 minutes
319