Removing An Expansion Card From A Riser Module - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
9.8.2

Removing an expansion card from a riser module

Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the corresponding riser module, see
page 70.
Removing the expansion card from a riser module
▶ If necessary, disconnect the cables from the expansion card.
▶ If applicable,
"Removing SFP+ transceiver modules" on page
284
52.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
87.
53.
56.
"Removing a riser module" on
52.
245.
RX2540 M6