▶ Carefully insert the expansion card into the selected PCIe slot and press
down firmly until it is fully seated in the slot (1).
▶ Fasten the screw (2).
Concluding steps
▶
"Installing the riser module" on page
▶
"Installing the CPU node" on page
▶
"Reassembling" on page
▶ Connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
9.6.2
Removing an expansion card from a riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the CPU node" on page
▶
"Removing the riser module" on page
Removing an expansion card from a riser module
▶ If necessary, disconnect the cables from the expansion card.
GX2570 M6
Expansion cards and riser modules
60.
50.
45.
48.
49.
40.
49.
57.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
40.
41.
143