4.10.2
Removing a riser module
Figure 21: Removing a riser module (example riser module 1)
▶ If necessary, disconnect the cables from the other components.
▶ Carefully pull out the corresponding riser module upward using the two
touch points (see circles).
4.10.3
Installing a riser module
Figure 22: Installing a riser module (example riser module 1)
▶ Insert the riser card into the system board slot and press down the green
touch points (see circles).
▶ If necessary, connect the cables to the other components.
RX2530 M6
Upgrade and Maintenance Manual
Basic hardware procedures
69