7.2.10 Replacing the SAS expander board
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.2.10.1 Preliminary steps
"Locating the defective server" on page 50
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
7.2.10.2 Removing the defective SAS expander board
Ê Remove the SAS expander board as described in section
SAS expander board" on page
7.2.10.3 Installing the new SAS expander board
Ê Install the SAS expander board as described in section
expander board" on page
7.2.10.4 Concluding steps
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
RX1330 M3
Hard disk drive (HDD) / solid state drive (SSD)
157.
160.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the
"Installing the SAS
163