Hard disk drive (HDD) / solid state drive (SSD)
7.4.13 Replacing the SAS expander board
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.4.13.1 Preliminary steps
"Locating the defective server" on page 47
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
7.4.13.2 Removing the defective SAS expander board
Ê Remove the SAS expander board, see section
expander board (if applicable)" on page
7.4.13.3 Installing the new SAS expander board
Ê Install the SAS expander board, see section
board (if applicable)" on page
7.4.13.4 Concluding steps
"Reassembling" on page 57
Ê
"Connecting the power cord" on page 63
Ê
"Switching on the server" on page 66
Ê
188
183.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the SAS
180.
"Installing the SAS expander
RX2530 M4