Concluding Steps; Replacing The Sas Expander Board; Preliminary Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
Ê Connect the cables to the second/third backplane as described in section
"Connecting cables to backplane 2/3" on page
Ê If applicable, install the SAS expander board as described in section
"Installing the SAS expander board" on page
Ê If applicable, install the SAS expander holder as described in section
"Installing the SAS expander holder" on page
7.5.5.3

Concluding steps

"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Installing 2.5-inch HDD/SSD modules" on page 193
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
7.5.6

Replacing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
7.5.6.1

Preliminary steps

"Locating the defective server" on page 61
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
"Removing the fan box" on page 397
Ê
218 Upgrade and Maintenance Manual
208.
220.
221.
Hardware: 10 minutes
RX2540 M2