Replacing The Sas Expander Board; Preliminary Steps; Removing The Defective Sas Expander Board; Installing The New Sas Expander Board - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) and solid state drive (SSD)

7.3.13 Replacing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / hexagon screw driver 5 mm

7.3.13.1 Preliminary steps

"Locating the defective server" on page 45
Ê
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the power cord" on page 49
Ê
"Getting access to the component" on page 50
Ê
"Removing the air duct" on page 61
Ê
"Removing the fan holder" on page 63
Ê

7.3.13.2 Removing the defective SAS expander board

Ê Remove the SAS expander board holder, see section
expander board holder" on page
Ê Remove the SAS expander board, see section
expander board" on page

7.3.13.3 Installing the new SAS expander board

Ê Install the SAS expander board, see section
board" on page
Ê Install the SAS expander board holder, see section
expander board holder" on page

7.3.13.4 Concluding steps

"Installing the fan holder" on page 64
Ê
"Installing the air duct" on page 62
Ê
154
152.
153.
149.
150.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the SAS
"Removing the SAS
"Installing the SAS expander
"Installing the SAS
RX2520 M4