Case IH AFX8010 Repair Manual page 1040

Fan and drive - Remove (B.50.A.54 - F.10.A.10)
AFX8010
Prior operation: To gain better access to the fan and drive, certain engine shields may be removed, see; Engine
hood - Remove (E.20.A.72 - F.10.A.10)
1. To remove the fan shroud the engine shielding
needs to be removed so access can be gained, and
enough clearance to remove the shroud halves.
2. Each halve is held to the cooler housing by 6 M8 x
20 mm bolts . The halves are bolted to each other
by two M6 x 20 mm bolts one at the top and one at
the lower center of the halves.
3. Remove the six M10 x 20 mm bolts from the fan
using a 17mm socket and ratchet. Remove the fan
from the engine.
POWER PRODUCTION - ENGINE COOLANT SYSTEM
9675 1 27/05/2004
B.50.A / 32
1
50034944
2
50034942
3
50035890