Case IH AFX8010 Repair Manual page 1022

9. Add the proper amount and specified coolant (See
Operators Manual) to the shunt tank. Fill the shunt
tank to above sight glass and install pressure/filler
cap . Start the engine and run it at low idle until
the water temperature is at normal operating
temperature. Re-check the shunt tank to ensure
proper level was maintained. If system is low add
coolant until air pockets have been filled in the
system.
CAUTION
D49-39 - Hot coolant can spray out if radiator cap
is removed. To remove radiator cap: Let system
cool, turn to first notch, then wait until all pressure
is released. Scalding can result from fast removal
of radiator cap. Check and service cooling system
according to maintenance instructions.
POWER PRODUCTION - ENGINE COOLANT SYSTEM
9675 1 27/05/2004
B.50.A / 14
6
10034916