Radiator - Install (B.50.A.32 - F.10.A.15)
AFX8010
1.
Clean out cooler housing area to be free of debris.
NOTE: Before installing the radiator into the cooler
housing check seal condition. The seals are in place to
provide vibration dampening and to seal out debris. It is
important these seals are in good condition to maintain
proper cooling performance.
2.
Place the radiator into the cooler housing.
3.
Locate all the hardware for the upper and lower
isolation mount assembly.
NOTE: Do not use petroleum products to install elastic
mounts, this can deteriorate the material, use soapy water.
POWER PRODUCTION - ENGINE COOLANT SYSTEM
9675 1 27/05/2004
B.50.A / 23
1
50034884B
2
50034915