Case IH AFX8010 Repair Manual page 1090

Sensing system Oil pressure - Under limit value (B.60.A.95.91 -
G.30.C.20)
AFX8010
E0161-01 - Oil Pressure Sensor
Context:
When the engine oil pressure drops below1 bar (14 psi) for more than 3 seconds after the engine has been running
for at least 10 seconds, the alarm message "A0002 Engine Oil Pressure LOW" will be displayed to the operator, and
the engine will be shutdown within 7 seconds to prevent engine damage from occurring. When the alarm message
is displayed, a permanent record is created in the error history.
Cause:
The "A0002 Engine Oil Pressure LOW" alarm has occurred at least once on the vehicle.
Possible failure modes:
1. The engine oil pressure has dropped below acceptable limits during vehicle operation.
Solution:
1. This error message appears as a permanent record that a low engine oil pressure condition has occurred
on the combine, and cannot be erased using the combine display controls. The EST must be used to
erase this fault code.
A. If this fault code appears, remove and inspect the engine oil for indication of internal damage.
POWER PRODUCTION - LUBRICATION SYSTEM
9676 1 27/05/2004
B.60.A / 24