Suzuki Wagon R Manual page 1807

5E-26 ANTILOCK BRAKE SYSTEM (ABS)
2
1
1
2
3) Disconnect ABS hydraulic unit/control module assembly con-
nector (1) by turning down lock (2).
4) Using special tool, loosen flare nuts (1) and disconnect brake
pipes (2) from ABS hydraulic unit/control module assembly
1
(3).
Special tool
: 09950-78220
NOTE:
Put bleeder plug cap onto pipe to prevent fluid from spill-
ing. Do not allow brake fluid to get on painted surfaces.
3
5) Remove one screw and disconnect take out ABS hydraulic
unit/control module assembly (1) from bracket using screw-
driver (2).
CAUTION:
• Do not give an impact to hydraulic unit.
• Use care not to allow dust to enter hydraulic unit.
• Do not place hydraulic unit on its side or upside down.
Handling it in inappropriate way will affect its original
performance.