Suzuki Wagon R Manual page 1766

INSTALLATION
CAUTION:
Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
1) Install pads (1).
NOTE:
Install pad with sensor (2) to vehicle center side.
Note the direction of each pad as shown in the figure.
3. Front right disc forward rotation
4. Front left disc forward rotation
5. Disc side of right inner pad
6. Disc side of right outer pad
7. Disc side of left outer pad
8. Disc side of left inner pad
2) Install caliper (1) and torque caliper pin bolts (2) to specifica-
tion.
Tightening torque
(a) : 30 N·m (3.0 kg-m, 22.0 lb-ft)
NOTE:
Make sure that boots (3) are fit into groove securely.
3) Torque front wheel nuts to specification.
Tightening torque
(b) : 85 N·m (8.5 kg-m, 61.5 lb-ft)
4) Upon completion of installation, perform brake test.
FRONT BRAKE 5B-5