Suzuki XL7 2007 Service Manual page 1517

Scan Tool Output
Control
Shift Solenoid 1
Shift Solenoid 2
Shift Solenoid Shift Solenoid 3
Shift Solenoid 4
Shift Solenoid 5
Additional Menu
Selections
• The TCM commands the reverse, 1st shift solenoid valve (S1)
ON and OFF. The scan tool Shift Solenoid 1 parameter should
match the commanded state.
• When the ignition is ON and the engine is OFF, there are no
limits to this control. The solenoid remains OFF until commanded
ON, and vice versa. When the output control is exited, the
solenoid state is determined by the TCM.
• This output control is not allowed when the engine is running. If
the engine is running, the output control will abort, and the
message "Output Control not allowed while Engine is Running"
appears on the scan tool.
• The TCM commands the 2-3, 3-4 shift solenoid valve (S2) ON
and OFF. The scan tool Shift Solenoid 2 parameter should match
the commanded state.
• When the ignition is ON and the engine is OFF, there are no
limits to this control. The solenoid remains OFF until commanded
ON, and vice versa. When the output control is exited, the
solenoid state is determined by the TCM.
• This output control is not allowed when the engine is running. If
the engine is running, the output control will abort, and the
message "Output Control not allowed while Engine is Running"
appears on the scan tool.
• The TCM commands the 1-2, 2-3, reverse shift solenoid valve
(S3) ON and OFF. The scan tool Shift Solenoid 3 parameter
should match the commanded state.
• When the ignition is ON and the engine is OFF, there are no
limits to this control. The solenoid remains OFF until commanded
ON, and vice versa. When the output control is exited, the
solenoid state is determined by the TCM.
• This output control is not allowed when the engine is running. If
the engine is running, the output control will abort, and the
message "Output Control not allowed while Engine is Running"
appears on the scan tool.
• The TCM commands the 3-4, 4-5 shift solenoid valve (S4) ON
and OFF. The scan tool Shift Solenoid 4 parameter should match
the commanded state.
• When the ignition is ON and the engine is OFF, there are no
limits to this control. The solenoid remains OFF until commanded
ON, and vice versa. When the output control is exited, the
solenoid state is determined by the TCM.
• This output control is not allowed when the engine is running. If
the engine is running, the output control will abort, and the
message "Output Control not allowed while Engine is Running"
appears on the scan tool.
• The TCM commands the reverse shift solenoid valve (S5) ON
and OFF. The scan tool Shift Solenoid 5 parameter should match
the commanded state.
• When the ignition is ON and the engine is OFF, there are no
limits to this control. The solenoid remains OFF until commanded
ON, and vice versa. When the output control is exited, the
solenoid state is determined by the TCM.
• This output control is not allowed when the engine is running. If
the engine is running, the output control will abort, and the
message "Output Control not allowed while Engine is Running"
appears on the scan tool.
Automatic Transmission:
Description
5A-107