SSANGYONG Y200 Manual page 2277

DI10-30
DTC Trouble
P0562 Low Battery Voltage
P0563 High Battery Voltage
P0560 Battery Voltage Malfunc-
tion
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Help
- Malfunction in recognition of system
source voltage (Lower than threshold).
• Less than minimum 8 Volts in 2000
rpm below
• Less than 10 Volts in 2000 rpm above.
- Check the battery wiring harness for
ECU pin #3, #4 and #5 (open, short,
poor contact).
- Check the battery main relay and fuse.
- Check the body ground.
- Measure the resistance between body
ground and ECU ground.
• Repair the ECU ground if the resis-
tance is high.
- Replace the ECU if required.
- Malfunction in recognition of system
source voltage (Higher than threshold).
• More than minimum 16 Volts in 2000
rpm below
- Check the battery wiring harness for
ECU pin #3, #4 and #5 (open, short,
poor contact).
- Check the alternator.
- Check the body ground.
- Measure the resistance between body
ground and ECU ground.
• Repair the ECU ground if the resis-
tance is high.
- Replace the ECU if required.
- Malfunction in recognition of system
source voltage (A/D converter faults).
• Less than minimum 8 Volts in 2000
rpm below
• Less than 10 Volts in 2000 rpm above.
- Check the battery wiring harness for
ECU pin #3, #4 and #5 (open, short,
poor contact).
- Check the battery main relay and fuse.
- Check the body ground.
- Measure the resistance between body
ground and ECU ground.
• Repair the ECU ground if the resis-
tance is high.
- Replace the ECU if required.
Torque Torque Delayed
Reduction Reduction Engine
(max.50%) (max.20%) Stop
O
O
O
Immediately Limp
Engine Home
Stop Mode
DIAGNOSIS
DI ENG SM - 2004.4