Volkswagen Passat 1995 Official Factory Repair Manual page 1184

Multiport fuel injection and ignition system
Display group 045: Knock control
Display
Indicated
Working
range
Specification
If the specification is not attained
group 045
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Note:
The check must be carried out during a test drive
as knock control is not active with an engine load
exceeding 3 ms.
- Perform test drive and observe specification for
knock control on display (second technician
necessary).
1
xx.xx
Ignition angle
correction
cylinder 1
0.0 - 15.0
0.0 - 12.0
- Read readiness code
memory has been erased, repair must be
verified via appropriate display group
01-35
- Press
- Press buttons -0- and -6- to select "End Output"
function 06 and press -Q- button to confirm
input.
Display fields
2
xx.xx
Ignition angle
correction
cylinder 2
0.0 - 15.0
0.0 - 12.0
, Readiness code, creating.
button.
3
xx.xx
Ignition angle
correction
cylinder 3
0.0 - 15.0
0.0 - 12.0
Page 28-27 , evaluating display
Page 01-33 . If DTC
Page
Page 29 of 37
28-26
4
xx.xx
Ignition angle
correction
cylinder 4
0.0 - 15.0
0.0 - 12.0
6/12/2004