Volkswagen Passat 1995 Official Factory Repair Manual page 1186

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Continuation
- Disconnect blue 3-pin connector -2-
from Knock Sensor (KS) 1 -G61- -1-.
- Connect multimeter with test leads
from VW 1594 to measure resistance
between terminals 1 and 2, 1 and 3,
and 2 and 3 on knock sensor
connector.
Specification
If the specification is attained:
- Connect VAG 1598/18 test box to
ECM wiring harness.
Page 31 of 37
28-28
ohms ( )
6/12/2004