Volkswagen Passat 1995 Official Factory Repair Manual page 1168

Multiport fuel injection and ignition system
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Mark on distributor must align with
mark on rotor arm or camshaft
position sensor cover.
Removing and installing distributor
Test conditions
Crankshaft and camshaft in no. 1
cylinder TDC position
Work sequence
- Remove distributor.
- Before installing distributor align oil
pump shaft drive tongue parallel to
crankshaft.
Page 13 of 37
28-10
6/12/2004