Volkswagen Passat 1995 Official Factory Repair Manual page 1210

Fuel supply system components, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Rules of cleanliness
When working on the fuel supply or fuel injection
systems, the following "5 rules of cleanliness"
should be carefully observed:
Thoroughly clean all connections and the
surrounding area before disconnecting.
Place parts that have been removed on a clean
surface and cover them. Use lint-free cloths
only!
Carefully cover over opened components or
seal, if repairs are not performed immediately.
Only install clean components: Only unpack
replacement parts immediately prior to
installation. Do not use parts that have been
stored loose (in tool boxes etc.)
When the system is open: Avoid working with
compressed air. Do not move vehicle unless
absolutely necessary.
Page 12 of 29
20-10
6/12/2004