Subaru Legacy 2002 Service Manual page 3375

Hide thumbs Also See for Legacy 2002:

Table of Contents

¼ When one set of connectors is viewed from the

front side, the pole numbers of one connector are

symmetrical to those of the other. When these two

connectors are connected as a unit, the poles

which have the same number are joined.

¼ Electrical wiring harness:

The connectors are numbered along with the num-

ber of poles, external colors, and mating connec-

tions in the accompanying list.

¼ The sketch of each connector in the wiring dia-

gram usually shows the (A) side of the connector.

The relationship between the wire color, terminal

number and connector is described in figure.

A wire which runs in one direction from a connec-

tor terminal sometimes may have a different color

from that which runs in the other direction from that

¼ In wiring diagram, connectors which have no ter-

minal number refer to one-pole types. Sketches of

these connectors are omitted intentionally.

BASIC DIAGNOSTICS PROCEDURE

¼ The following color codes are used to indicate

the colors of the wires used.

Wiring System

Sealed (Inner)

Sealed (Outer)

Chapters

Table of Contents