Subaru Legacy 2002 Service Manual page 3352

5. Subaru Select Monitor
A: OPERATION
1. READ DIAGNOSTIC TROUBLE CODE
(DTC)
S009503A1607
1) Prepare Subaru Select Monitor kit.
2) Connect diagnosis cable to Subaru Select
Monitor.
3) Insert cartridge into Subaru Select Monitor.
NOTE:
<Ref. to IM-4, SPECIAL TOOLS, PREPARATION
TOOL, General Description.>
SUBARU SELECT MONITOR
S009503
S009503A16
S2M0285
S2M0286A
4) Connect Subaru Select Monitor to data link
connector.
(1) Data link connector located in the lower por-
tion of the instrument panel (on the driver's
side).
(2) Connect diagnosis cable to data link con-
nector.
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor.
5) Turn ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
6) On the Main Menu
the {Each System Check} and press the [YES] key.
7) On the System Selection Menu
screen, select the {Engine Control System} and
press the [YES] key.
8) Press the [YES] key after displayed the infor-
mation of engine type.
9) On the Engine Diagnosis
select the {Diagnostic Code(s) Display} and press
the [YES] key.
IM-7
Immobilizer (Diagnostics)
B2M2960B
S2M0288A
display screen, select
display
display screen,