Subaru Legacy 2002 Service Manual page 3374

Hide thumbs Also See for Legacy 2002:

Table of Contents

Wiring System

C: HOW TO READ WIRING DIAGRAMS

1. WIRING DIAGRAM

The wiring diagram of each system is illustrated so that you can understand the path through which the

electric current flows from the battery.

Sketches and codes are used in the diagrams. They should read as follows:

¼ Each connector and its terminal position are indicated by a sketch of the connector in a disconnected

state which is viewed from the front.

¼ The number of poles or pins, presence of a lock, and pin number of each terminal are indicated in the

sketch of each connector. In the sketch, the highest pole number refers to the number of poles which the

connector has. For example, the sketch of the connector shown in figure indicates the connector has 9

Connector used in vehicle

BASIC DIAGNOSTICS PROCEDURE

S903627G5201

Connector shown in wiring diagram

Number of poles

Numbered in order from upper

right to lower left.

Numbered in order from upper

left to lower right.

Chapters

Table of Contents