Starter Driven Gear, Starter, Clutch Removal - Honda 1998 VT750C Service Manual

Table of Contents

Advertisement

ALTERNATOR/STARTER CLUTCH
Remove the flywheel using the rotor puller.
TOOL:
Rotor puller
07733-0020001 or
07933-3280001
Remove the needle bearing and woodruff key from
NEEDLE BEARING
the crankshaft.
NOTE:
• When woodruff key removal, be careful not to
damage the key groove or crankshaft.
• Do not loose the woodruff key.
WOODRUFF KEY
STARTER DRIVEN GEAR, STARTER
CLUTCH REMOVAL
Check that the driven gear turns smoothly in one
direction and locks up in the other direction.
Remove the starter driven gear from the flywheel
while turning the driven gear counterclockwise.
FLYWHEEL
Remove the starter one-way clutch torx bolts while
holding the flywheel with a flywheel holder.
Do not remove the
clutch housing and
one-way clutch
unless it is
necessary to
inspect them.
9-4
TOOL:
Flywheel holder
07725-0040000 or
equivalent commercially
available in U.S.A.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents