Front And Rear Suspension Inspection; Side Stand - Honda XL125V Owner's Manual

FRONT AND REAR SUSPENSION
INSPECTION
to the maintenance precautions
(Refer
page 60).
Check the
1.
fork assembly
by locking
front brake and pumping. the fork up
and down vigorously. Suspension
should
action be smooth there
and
must be
leakage.
no oil
2. Swingarm bearings should be checked
pushing hard against the side
by of the
wheel while the motorcycle
rear is on
indicates
support block. Free play
wom
bearings.
inspect front and
3. Carefully all rear
suspension fasteners for
tightness.
76
on
the
a

SIDE STAND

to the maintenance precautions on
(Refer
60).
page
Check the side stand system
for
proper
function.
Check the spring loss
for damage
s or
(1)
tension and the side stand assembly
of
freedom movement.
for of
the
Check side stand ignition cut-off
*
system:
Sit astride the motorcycle; put the side
—-
.
stand the transmission
up and
neutral:
Start the
the engine and with clutch
n
.
lever pulled shift the transmission
in,
into
gear.
the side stand.
Lower The engine
w
.
should stop as put the side stand
you
down.
the side stand system does
not operate
If
as
described, see your Honda dealer
service.
in
(1) Spring
for