Reset Error Message - Lenze 8400 StateLine C Reference Manual

Error subject area
No. Name
27 Extension module slot 1
31 CAN integrated (general)
35 CAN process data object (PDO)
40 Device configuration
44 Parameter set
45 Device firmware (internal error)
54 Fieldbus
84 MotionControlKernel
100 User error 1
... ...
103 User error 4
Error ID
Bit15 14
8-bit value (0 ... 255) for error identification within the error subject area.

Tip!
All possible 16-bit error numbers are listed in the table
second column.
9.9.3

Reset error message

An error message with the response "Fault", "Trouble", "TroubleQSP" or "Warning locked"
must be explicitly reset (acknowledged) after the cause of the error has been eliminated.

To reset (acknowledge) a pending error message, execute the device command
C00002/19

Tip!
With an online connection to the controller, use the Diagnostics tab of the
»Engineer« and click Error reset to reset a pending error message.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Assigned errors
Errors that are reported by the extension module, and
communication errors to the plugged-in extension module.
Errors related to general CAN functions.
Errors that are explicitly only related to the CAN-PDO (process data
objects).
Errors that occur due to incompatibilities of the plugged-in individual
components (fieldbus module, safety module, et al.).
Errors that occur in connection with the parameter set or the
parameter set memory (memory module).
Internal error of the device firmware.
Errors that occur in connection with fieldbus communication.
Errors that occur within the MotionControl basic functions (e.g.
profile generation, brake control, positioning).
Errors generated by the user (by the application) via the
LS_SetError_1
8 7 0
( 407)
= "1".
L
8400 StateLine C | Reference manual
Diagnostics & error management
Error messages of the operating system
system block.
"Short overview
Remedy possible by
user?
Yes if it is a fieldbus error.
Yes
Yes
Yes if the error relates to a
module plugged-in by the
user.
Yes if the error relates to a
missing or incompatible
memory module.
No
Yes
Yes
Yes
(A-Z)" in the
405