Truth Table For Activating The Pre-Switch Off - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Technology applications
TA "Switch-off positioning"
7.3.2.1

Truth table for activating the pre-switch off

Input
bJogCtrl
InputSel1
FALSE
TRUE
FALSE
TRUE
[7-1] Truth table for activating the pre-switch off
328
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Function
bJogCtrl
InputSel2
FALSE Pre-switch off inactive
FALSE The bJogCtrlSlowDown1 and
bJogCtrlStop1 inputs are evaluated.
TRUE The bJogCtrlSlowDown2 and
bJogCtrlStop2 inputs are evaluated.
TRUE The inputs bSJogCtrllowDown3 and
bJogCtrlStop3 are evaluated.
L
Response in the setpoint generator
(FB L_NSet)
No response
• The input signal bJogCtrlRfgIn is output
directly at output bRfgOut.
• The input signals bJogCtrlJog1 and
bJogCtrlJog2 are passed through 1:1 to
the downstream FB L_NSet
selection of fixed setpoints.
Pre-switch off can be activated
• If the slowdown function is activated via
the selected bJogCtrlSlowDown input,
fixed setpoint 2 is activated in the
setpoint generator.
• If the stop function is activated via the
selected bJogCtrlStop input, the setpoint
generator is deactivated.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
for the