Internal Interfaces | System Block "Ls_Analoginput - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
I/O terminals
Analog terminals
6.2.3

Internal interfaces | System block "LS_AnalogInput"

The LS_AnalogInput system block displays the analog input in the FB Editor.
Output
nIn1_a
bCurrentErrorIn1
6.2.4 Internal interfaces | System block "LS_AnalogOutput"
The LS_AnalogOutput system block displays the analog output in the FB Editor.
Input
nOut1U_a
280
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Value/meaning
Data type
Analog input 1
• Scaling:
C00033/1 | INT
14
±2 ≡ ±10 V for use as voltage input
14
+2 ≡ +20 mA for use as current input
Status signal "Current input error"
• Only when analog input 1 is used as current input.
BOOL
• Application: Cable-breakage monitoring of the 4 ...20 mA circuit.
TRUE |I
AIN1
Information/possible settings
Data type
Analog output 1
14
• Scaling: 2 ≡ 16384 ≡ 10 V
INT
L
| < 4 mA
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011