Ls_Seterror_1 - Lenze 8400 StateLine C Reference Manual

Parameter
Parameter
C00400/1
C00400/2
C00400/3
(from version 06.00.00)
16.2.22

LS_SetError_1

Parameterisable responses to user-defined events are tripped.

For a detailed description see the main chapter "Diagnostics & error
management":
System block "LS_SetError_1"
16.2.23 LS_SyncManagement
Output of status information for synchronising the internal time base.

For a detailed description see main chapter "Synchronisation of the internal time
base of the controller":
Internal interfaces | System block "LS_SyncManagement"
16.2.24 LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.

For a detailed description see the main chapter
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Possible settings
0 ms
0 ms
0 ms
( 425)
L
Function library
System blocks | LS_SetError_1
Info
60000 Length of LOW level (break)
• For output bSquareWave
• Lenze setting: 1000 ms
60000 Length of HIGH level
• For output bSquareWave
• Lenze setting: 1000 ms
60000 Delay of the bFirstCycleDone status
• Lenze setting: 100 ms
( 508)
"Parameter change-over".
( 509)
875