Drive Diagnostics With The "Engineer - Lenze 8400 StateLine C Reference Manual

9.3 Drive diagnostics with the »Engineer«
When an online connection to the controller has been established, the connected
controller can be diagnosed and relevant actual controller states can be displayed in a
clearly arranged visualisation using the »Engineer«:
Button
Resetting an error
Logbook...
Monitoring...
Device status...
Drive control...
Device information...
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Function
Display details of the status determining error.

Display details of the current error.

Display all active sources of a controller inhibit.

Display all active sources of a quick stop.

Acknowledge fault message (if the error cause has been eliminated).
Display the Logbook of the controller.
Configure the Monitoring.
Display the internal state machine including the current device status.
Display the bit assignment of the following control-related words:
• MCI control word (C00136/1)
• CAN control word (C00136/2)
• Cause of controller inhibit (C00158)
• Cause of quick stop (C00159)
• Status word (C00150)
• Status word 2 (C00155)
Display identification data, e.g. firmware information or serial number of individual
controller components.
L
Diagnostics & error management
Drive diagnostics with the »Engineer«
( 389)
( 394)
383