8400 StateLine C | Reference manual
Function library
System blocks | LS_DisFree_a
16.2.8.1
Display of internal process factors in application units
This function extension is available from version 06.00.00!
In addition to the display in percent in C00482/1...8, for the first four analog signals
nDis1_a ... nDis4_a the configurable display parameters
these display parameters, internal process variables can be displayed, e.g. on the keypad,
with an individual scaling and an individual unit.
Configuration of the display parameters (C00487/1...4):
Parameter
C00484/1...4
C00485/1...4
C00486/1...4
[16-27] Formula for scaling the display
Example 1:
Input variable nDis1_a = 100 %
Offset 1 (C00484/1) = 0 %
Display factor 1 (C00485/1) = 123.45
Text 1 (C00486/1) = "bottles"
Example 2:
Input variable nDis2_a = 40 %
Offset 2 (C00484/2) = 35 %
Display factor 2 (C00485/2) = 20
Text 2 (C00486/2) = "kg"
860
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Possible settings
-199.99
-65536.0000
String of digits
nDis1_a [%]
Application unit 1
------------------------------------------------------------------- - Display factor 1 [text 1]
=
100 [%]
Application unit 1
-------------------------------------- - 123.45 [bottles]
=
100 [%]
Application unit 2
=
L
C00487/1...4
Info
%
199.99 Offset 1 ... 4
• See formula [16-27].
• Lenze setting: 0.00 %
65536.0000 Display factor 1 ... 4
• Scaling of the input variable for
• See formula [16-27].
• Lenze setting: 1.0000
Text 1 ... 4
• For each display value, an
Offset 1 [%]
+
⋅
100 [%]
0 [%]
+
⋅
=
40 [%]
35 [%]
+
-------------------------------------- - 20 [kg]
⋅
15.00 kg
=
100 [%]
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
are provided. Via
the display.
individual unit (e.g. "bottles") can
be set.
123.45 bottles