Inserting A Function Block - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
Working with the FB Editor
Reconfiguring the predefined interconnection
15.4.1.1

Inserting a function block


Note!
In the FB Editor, function blocks are only available in the "Application
interconnection" level!

How to insert a function block into the interconnection:
1. In the FB Editor toolbar, click the
• The Insert Function Block dialog box appears:
2. Unless it is already displayed, select the Function Blocks tab.
• All function blocks available are displayed in the Search results list field.
• A preview of the selected function block is displayed.
• A detailed description of all available function blocks can be found in the main
chapter
3. If required, define Search criteria to narrow down the available function blocks:
• Block name:
String which must be contained in the name of the function block.
4. After changing the search criteria, press the Find button to update the selection.
• Then, only the function blocks complying with the features set in the search
criteria are shown in the Search Results list field.
• If no search criteria are set, all function blocks available are shown.
742
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
"Function library".
( 772)
L
icon.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011