Terminal Assignment Of The Control Modes - Lenze 8400 StateLine C Reference Manual

7.3.3

Terminal assignment of the control modes

The following comparison provides information about which inputs/outputs of the application block LA_SwitchPos are
interconnected to the digital and analog input/output terminals of the drive controller in the different control modes.
10: Terminals 0 12:
Digital input terminals
X4/RFR Controller enable
X4/DI1 Fixed setpoint 1/3
bJogCtrlJog1
X4/DI2 Fixed setpoint 2/3 Stop function 2
bJogCtrlJog2 bJogCtrlStop2
X4/DI3 Reset error message
bFailReset
X4/DI4 Change of direction of
rotation
bSetSpeedCcw
Analog input terminals
X3/A1U, A1I
10 V ≡ 100 % reference speed (C00011)
Digital output terminals
X4/DO1 -
X101/COM, NO -
Analog output terminal
X3/O1U -
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Terminals 2 14: Terminals 11 16: Terminal 16
Stop function 1 Fixed setpoint 1/3
bJogCtrlStop1 bJogCtrlJog1
Selection: Pre-switch off Fixed setpoint 2/3
1 bJogCtrlJog2
bJogCtrlSlowDown 1
CW rotation quick stop CW rotation quick stop
bRLQCw bRLQCw
Selection: Switch-off position 1
bJogCtrlInputSel1
CCW rotation quick stop CCW rotation quick stop
bRLQCcw bRLQCcw
Selection: Switch-off position 2
bJogCtrlInputSel2
Main speed setpoint
nMainSetValue_a
- -
- -
- -
Control mode (C00007)
20: Keypad 21:
Controller enable / Reset of error message
bFailReset
- -
- -
- -
- -
- -
- - -
- - -
- - -
PC 30: CAN 40: MCI
Stop function 1
bJogCtrlStop1
Selection: Pre-switch off 1
bJogCtrlSlowDown 1
Stop function 2
bJogCtrlStop2
Selection: Pre-switch off 2
bJogCtrlSlowDown 2
Additional speed setpoint
nAuxSetValue_a
10 V ≡ 100 % reference speed (C00011)
- -
- -
- -