Deleting Objects That Are No Longer Required - Lenze 8400 StateLine C Reference Manual

L-force drives; e84avsc series;

Hide thumbs Also See for 8400 StateLine C:

Table of Contents

8400 StateLine C | Reference manual

Working with the FB Editor

Reconfiguring the predefined interconnection

Deleting objects that are no longer required

Objects that are no longer required can be easily deleted again. "Delete" only means that

the object is removed from the drawing area. If you have deleted an object from the

drawing area, you can reinsert it any time into the interconnection.

Deleting an object cannot be undone.

Together with the object, all available connections to this object are deleted.

How to delete objects that are no longer required:

1. Select objects to be deleted.

• You can select a single object by clicking the header of the object.

• You can select objects that are placed together by drawing a frame around these

objects while keeping the mouse button pressed.

• If you click the header of further objects while pressing <Ctrl>, these will be

added to an already existing selection (multi-selection).

• All selected objects are highlighted by a light green header.

2. Press <Del>.

Table of Contents