Purpose Of The Technology Applications; Application Cases For A Technology Application - Lenze 8400 StateLine C Reference Manual

2.1.1

Purpose of the technology applications

The stepped Inverter Drives 8400 series provides solutions for simple to complex
applications – depending on the user's experience and knowledge about the handling of
drives and drive tasks.
On the one hand a great scope of standard drive tasks for frequency inverters is covered by
the technology applications offered by Lenze, and on the other hand, the user is relieved
from time-consuming programming activities. Some drive tasks are often alike in practice
so that minor modifications of the corresponding technology application can quickly lead
to success.
Other important features of technology applications are:
 Direct implementation of drive tasks without recreating a function block
interconnection inside the device.
 Operation via keypad and/or operation via convenient operator dialogs in the
«Engineer».
 Commissioning via few operating and diagnosing parameters (local keypad operation).
 Achieving a transparency as high as possible via the integrated functionality of the
device by representing signal flow diagrams.
 Provision of a basic functionality suitable and often sufficient for many applications.
2.1.2

Application cases for a technology application

You should use a technology application if
 the task can be solved completely or to a great extent by the basic functionality of the
technology application.
 the end customer does not want to create the comprehensive core functions of the
corresponding technology on his own.
 the creation time for a project is to be reduced by using the ready-made technology
application
 the end customer wants to build upon the know-how of Lenze.

Tip!
If the end customer of the machine does not want to use ready-made Lenze
functions, individual "free configuration" drive solutions can be implemented from
the "HighLine" device version onwards.
Here, a technology application can be used as a basis which can be adapted to the
requirement by being changed or extended via the function block editor (see the
following chapter).
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
Introduction: Parameterising the controller
Integrated technology applications
L
29