Device Control (Dctrl) - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual

Device control (DCTRL)

4 Device control (DCTRL)
This chapter provides information on internal device control as well as the device
commands which can be executed via the subcodes of C00002.
 The device control causes the controller to take defined device statuses.
 The device control provides a multitude of status information in many ways:
– Visually via the
– As text messages in the Logbook.
– As process signals via the outputs of the
– Via diagnostic / display parameters which are included in the »Engineer« parameter
list as well as in the Diagnostics category in the keypad.

Note!
The device statuses of the controller are based on the operating statuses of the
CiA402 standard.
74
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
LED status displays on the front of the controller.
( 389)
Device state machine and device statuses
L
LS_DriveInterface system block.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
( 382)
( 100)
( 86)