Using Di1 And Di2 As Digital Inputs - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
I/O terminals
Digital terminals
6.1.1.1

Using DI1 and DI2 as digital inputs

Function assignment 0: DI1=In1 / DI2=In2
With this setting in
digital inputs.
 It is possible to set individual debounce times (C02830/1...4) and terminal polarities
(C00114) for each digital input.
 The current terminal level at the input of the internal processing function is shown in
C00443/1
 The output level for the application is shown in
Internal interfaces to the application
 Relevant outputs at the
Output
DIS code | data type
bIn1 ... bIn4
Related topics:
Using DI1 and DI2 as frequency inputs
Using DI1 as a counter input
Internal interfaces | System block "LS_DigitalInput"
258
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
C00115 , the digital input terminals have been configured as "normal"
in bit-coded form.
LS_DigitalInput
Value/meaning
Digital input DI1 ... DI4
C00443/2 | BOOL
( 263)
L
C00443/2 in bit-coded form.
system block:
( 259)
( 266)
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011