Process Data Transfer - Lenze 8400 StateLine C Reference Manual

8400 StateLine C | Reference manual
About this documentation
Terminology used
Term
Keypad
LA
Lenze setting
LP
LS
Port block
PSM
QSP
SC
Service brake
SLPSM
SLVC
Subcode
System block
USB diagnostic adapter
VFCplus
24
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Meaning
The keypad is an alternative to the PC for the local operation, parameterisation,
and diagnostics in a simple manner.
• Detailed type designation: X400 keypad
• Order designation: EZAEBK1001
Abbreviation for Lenze Application block
Example: "LA_NCtrl" (block for the "Actuating drive speed" application)
This setting is the default factory setting of the device.
Abbreviation for Lenze Port block
Example: "LP_CanIn1" (CAN1 port block)
Abbreviation for Lenze System block
Example: "LS_DigitalInput" (system block for digital input signals)
Block for implementing the process data transfer via a fieldbus
Abbreviation for permanently excited synchronous motor
Abbreviation for quick stop
Abbreviation for Servo Control
The service brake serves to shutdown rotary or translatory masses in motion in
a controlled manner. The energy to be dissipated in this process is produced in
the form of friction energy. Unlike emergency braking, this process is a regular
and recurring operating mode.
Abbreviation for sensorless control of synchronous motors
Abbreviation for SensorLess Vector Control
If a code contains several parameters, the individual parameters are stored
under "subcodes".
This Manual uses a slash "/" as a separator between code and subcode
(e.g. "C00118/3").
The term is usually called "subindex".
System blocks provide interfaces to basic functions and to the hardware of the
controller in the FB Editor of the »Engineer« (e.g. to the digital inputs).
The USB diagnostic adapter is used for the operation, parameterisation, and
diagnostics of the controller. Data are exchanged between the PC (USB
connection) and the controller (diagnostic interface on the front) via the
diagnostic adapter.
• Order designation: E94AZCUS
Abbreviation for Voltage Frequency Control
L
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011