Comparing Interconnections - Lenze 8400 StateLine C Reference Manual

15.7

Comparing interconnections

The comparison operation serves to compare FB interconnections of 8400 devices within
the project. An offline<>online comparison and the comparison of two online devices are
possible.

Note!
Only applications can be compared which have been enabled in the FB Editor!
Block positions, line representations, and connector visibilities are not
compared.

How to compare two FB interconnections:
1. Select the command Application dataCompare FB interconnections....
• The Compare FB interconnections dialog box is displayed:
2. Select the interconnections to be compared in the project view represented on the
left and right.
• In order to execute a comparison with an online device, select "Online" in one of
the two upper list fields. Then all available online devices are displayed for
selection.
• If you select "Online" in one of the two upper list fields, you can also compare
the interconnections of two available online devices.
Firmware ≤ 11.00 - DMS 8.0 EN - 10/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
8400 StateLine C | Reference manual
L
Working with the FB Editor
Comparing interconnections
767